Heeve 100kg Bolt-On Telescoping Ramp Support Legs

2 x Add-On Telescopic Support Legs to Increase The Loading Capacity Of Your Ramp by 100kg

The Heeve Telescoping Ramp Support Legs are designed to increase the capacity of your Heeve ramp by up to 100kg.

These support legs drop down from the middle hinge point of your ramp and act as a support to help take some of the weight of the load on the ramp.

How Do The Heeve Telescoping Ramp Support Legs Work?

For most ramps, the weight is evenly distributed over the top and bottom of the ramp. By adding the Heeve Telescoping Ramp Support Legs to your ramp, you're effectively adding another connection point and therefore spreading the load of the ramp evenly over 3 points rather than just 2 points of contact.

Specifications

• Retracted Length: 280mm
• Extended Length: 420mm

What Ramps Are Compatible With The Support Legs?

The following products are compatible with the support legs:

• Heeve 2.3m x 340kg Aluminium Curved Folding Loading Ramp
• Heeve 2.3m x 340kg Aluminium Curved Folding Motorcycle Ramp
• Heeve 2.3m x 680kg Aluminium Curved Folding ATV Ramps
• Heeve 2.3m x 680kg Aluminium Curved Folding Lawn Mower Ramps 
• Heeve 2.3m x 680kg Aluminium Curved Folding Heavy-Duty Motorcycle Ramp
• Heeve 2.3m x 1.3-Tonne Alum. Curved Folding Heavy-Duty Loading Ramps
• Heeve 2.3m x 1.3-Tonne Aluminium Curved Folding Heavy-Duty ATV Ramps
• Heeve 2.3m x 1.3-Tonne Alum Curved Folding Heavy-Duty Lawn Mower Ramps
• Heeve 3m x 1-Tonne Aluminium Curved Folding Heavy-Duty Loading Ramps
• Heeve 3m x 1-Tonne Aluminium Curved Folding Heavy-Duty ATV Ramps
• Heeve 3m x 1-Tonne Alum. Curved Folding Heavy-Duty Lawn Mower Ramps
• Heeve 2.1m x 400kg Aluminium Folding Walk Ramp (min. ramp height 560mm)
• Heeve 2.1m x 400kg Aluminium Folding Van Ramp (min. ramp height 560mm)

How to Install The Heeve Telescoping Ramp Support Legs

Your Heeve Ramps will come with a standard bolt, nut and pin.

1. Remove the standard hinge bolt from your ramp and replace it with the longer hinge bolt supplied with the Heeve Telescoping Ramp Support Legs.
2. Once in place slide the Heeve Telescoping Ramp Support Legs over the new longer bolt.
3. Fix the nut place and you're done!